FAGOR TSE2-1000-4000-1600 Mechanical - Double column drawing press

Maschinen Info

  • Construction Date

    2025

  • Category

    Metalworking machines, presses

Article no. 2034-245
Location: Spain

 

Description of the

This new FAGOR TSE2-1000-4000-1600 heat press is immediately available!!!

DESCRIPTION:
New transfer press !!! Stored and never set up.
COMPLETE with electronic beam transfer 0 - 800 mm
Transfer step and 500-1300 mm
Distance between the transfer bars. Lifting stroke = 0-150 mm.
2 x sliding table T-shape extendable.
Tool total weight max. 20,000 kg, top section max. 10,000 kg.
Tappet weight equalisation by means of compressed air cylinder.
Automatic pressure setting with setpoint specification from the mould memory.
Lubrication: Main bearing points, gear wheels are continuously lubricated by the
circulation lubrication.
LED tool room lighting. 2 auxiliary control panels, scrap guide plates,
Press force measuring device, vibration elements make KTI

Technical data:
Frame type: Transfer press
Drive type: mechanical
Window in the side stand: yes
Diarrhoea hole in the table: yes
Sliding table: yes
Number of tables: 2
Press forces
Total rated power: 1000 tonnes
Press table
Clamping surface (left-right) 4000 mm
Clamping surface (front-rear) 1600 mm
Height above floor: 600 mm
Automatic mould clamping device: yes
Tappet
Stroke: 400 mm
Tappet (mechanical press)
Tappet adjustability: 300 mm
Stroke rate: min. 8 /min
Max. stroke rate: 50 /min
Hydraulic overload protection: yes
Tool installation dimensions
Tool installation height (bottom stroke, adjustment 766 mm
Distance between uprights (left-right) 4250 mm
Free passage at the side (width) 1800 mm
Tool weight max. 20000 kg
Transfer system
Internal width of gripper rail closed max. 500 mm
Gripper rail inside width open max. 1300 mm
Electrical connection data
Power consumption (total: 200 kW
Connected load: 350 kVA
Supply voltage: 400 V
Mains frequency: 60 Hz
Dimensions / Weights
Space required Length: 7500 mm
Space requirement width: 4800 mm
Height above floor: 7360 mm
Height under corridor: 4000 mm
Total weight approx.: 250000 kg
Additional equipment for presses
Light barrier: yes
Cut impact damping: yes
Automatic mould clamping device: yes
Hydraulic overload protection: yes
Transfer device: yes

 

Technical details

Pressure 1000 t
Stand width 4250 mm
Stroke 400 mm
SIEMENS S7-1500F control system
Table dimensions - lengthwise 4000 mm
Table dimensions - transverse 1600 mm
Total power requirement 200 kW
Machine weight approx. 250 tonnes
Space requirement approx. 7.5 x 4.8 x 7.4 m